1 Comment
Crankbrothers Eggbeater: bearings & seals replacement August 31st, 2017 | Written by Jeffrey | MTB.guide
The Crankbrothers Eggbeater pedals require some maintenance, but it’s quick and easily done. Take the following steps to do a regular service of replacing the bearings and seals of the Crankbrothers Eggbeater using the Pedal Refresh Kit. In addition, the replacement of the Tread Contact Sleeves is also included.
1 Comment
How to replace the chain on your MTB January 5th, 2017 | Written by Jeffrey | MTB.guide
Riding with a worn chain decreased performance and causes excessive wear on your chain rings and cassette. But how do you know if your chain needs replacement, what type of chain and connector do you need and how do you replace your chain? These questions and more will all be addressed in this article (and video).
2 Comments
How to replace a derailleur hanger June 12th, 2016 | Written by Jeffrey | MTB.guide
Seeing your derailleur at a weird angle or even worse, broken off, isn’t a pretty sight. But luckily you can easily replace them in contrast to the old frames where the hanger was welded to the rest of the frame. The damage is usually not limited to the derailleur hanger so we’re also briefly going over installing the rear derailleur, chain and doing derailleur adjustment.